| PRODUCT NAME |
SK TEC |
DESCRIPTION
|
HYDROGUARD® Finish AL HG |  | Two-pack high gloss water-based epoxy topcoat with aluminum. Very good resistance to intermittent contact with aggressive solutions of salts, alkalis, mild acids, solvents, oils and grease. HYDROGUARD Finish AL HG can be used for exposures in category C3, C4 and C5 (according to standard ISO 12944) over various primer of the trademarks HYDROGUARD. Being formulated with epoxy resins will chalk when exposed to sunlight. | |
HYDROGUARD® Finish HG | | Two-pack high gloss water-based epoxy topcoat. Very good resistance to intermittent contact with aggressive solutions of salts, alkalis, mild acids, solvents, oils and grease. HYDROGUARD HG Finish can be used for exposures in category C3, C4 and C5 (according to standard ISO 12944) over various primer of the trademarks HYDROGUARD. Being formulated with epoxy resins will chalk when exposed to sunlight. | |
HYDROGUARD® HB | | Water based high build "surface tolerant" two components epoxy primer-intermediate. Suitable for protection of structures placed in CX class (according to ISO 12944 standards) such as offshore platforms, refineries, chemical plants and wind turbines. HYDROGUARD HB is suitable as midcoat in protective systems qualified according to NORSOK M-501 System 1 and System 7B. This product contributes to the Green Buildings standard credits for LEED certification. | |
HYDROGUARD® HB AL | | Water based "surface tolerant" two components high build epoxy paint with aluminium. Particularly suitable for protection of structures placed in CX class (according to ISO 12944 standards) such as offshore platforms,refineries, chemical plants and wind turbines, or occasionally as single coat application for the protection of industrial machinery. Is also suitable as midcoat in protective systems qualified according to NORSOK M-501 System 7B. This product contributes to the Green Buildings standard credits for LEED certification. | |
HYDROGUARD® HB GF | | Water based "surface tolerant" two components high build epoxy paint, glass flakes reinforced to increase the resistance to abrasion and scratch. HYDROGUARD HB GF can be used as a primer, intermediate, finish or one-coat direct to metal for steel, stainless steel and galvanized steel structures placed in an environment with high corrosivity. Formulated for the treatment of surfaces where it is not possible to perform appropriate preparation, optimal for operations of maintenance and repair. | |
HYDROGUARD® HB MIO | | Water based "surface tolerant" high build two components epoxy primer-intermediate micaceous iron oxide pigmented. Suitable for protection of structures placed in CX class (according to ISO 12944 standards) such as offshore platforms, refineries, chemical plants and wind turbines. This product contributes to the Green Buildings standard credits for LEED certification. | |
HYDROGUARD® HG | | High gloss water-based epoxy paint for single coat applications. Designed for the protection of steel, galvanized steel and aluminium, it offers good corrosion resistance and excellent flexibility. Optimal protection of industrial machinery, which are occasionally in contact with aggressive solutions of salts, alkalis, mild acids, solvents, oils and grease. Being formulated with epoxy resins will chalk when exposed to sunlight. | |
HYDROGUARD® Midcoat | | Two-pack fast drying water-based epoxy midcoat designed for the protection of steel structures place in industrial areas with highly aggressive atmosphere and Offshore structures. Not suitable for immersion service.
This product contributes to the Green Buildings standard credits for LEED certification. | |
HYDROGUARD® Novolac | | Two components water based phenolic epoxy coating composed by third generation interpenetrate polymers networks and nucleophilic modified hardeners. HYDROGUARD Novolac was formulate for the protection of steel and stainless steel operating in the temperature range between -80 ° C and + 240 ° C. Thanks to the special and innovative formulation provides excellent chemical resistance in immersion that allow its use for the protection of internal surfaces of tanks and / or other (see resistance list).
Is recommended for CS-1,3,4 and SS-1,2,3 systems of NACE SP0198 Standard Practice for coatings to control corrosion under insulation (CUI). | |
HYDROGUARD® Primer | | Two-pack water-based fast drying epoxy primer for the protection of steel and aluminum structures placed in highly aggressive industrial atmosphere. | |
HYDROGUARD® Primer SZ | | Water based, fast drying, two pack epoxy primer with anticorrosive pigmentation free from zinc phosphate applyable at high dry film thikness.
Particularly suitable as a primer coat in two pack water based epoxy systems for the protection of steel placed in industrial and marine atmosphere. The ease of drying in the winter season, allows the application of more coats throughout the day. This product contributes to the Green Buildings standard credits for LEED certification. | |
HYDROGUARD® Primer ZP | | Water based fast drying two pack epoxy primer, zinc phosphate pigmented. Particularly suitable as a primer coat in two pack water based epoxy systems for the protection of steel.
The ease of drying in the winter season, allows the application of more coats throughout the day. | |
HYDROGUARD® SG | | Semigloss water-based epoxy paint for high thikness single coat applications. Designed for the protection of steel, it offers very good corrosion resistance and excellent flexibility. Optimal protection of industrial machinery, which are occasionally in contact with aggressive solutions of salts, alkalis, mild acids, solvents, oils and grease. Being formulated with epoxy resins will chalk when exposed to sunlight. | |
HYDROGUARD® SZ | | Two-pack fast drying water-based epoxy primer with anticorrosive pigmentation zinc phosphate free. Designed for the protection of steel structures place in industrial areas with highly aggressive atmosphere and Offshore structures. Particularly suitable in painting of metal structures in contact with oils and greases. This product contributes to the Green Buildings standard credits for LEED certification. | |
HYDROGUARD® Zinc | | Three components water based zinc rich epoxy primer in accordance to regulatory SSPC Paint 20 level 1. Can be used as primer for particularly aggressive environments such as offshore structures, chemical and petrochemical plants, bridges, and in protective systems qualified according to NORSOK M-501 System 1. HYDROGUARD Zinc contains 88% by weigh of zinc powder in dry film thickness. This product contributes to the Green Buildings standard credits for LEED certification. | |
HYDROGUARD® Zinc 78 | | Two components water based zinc rich epoxy primer in accordance to regulatory SSPC Paint 20 level 2. Can be used as primer in protective systems up to C5 class in accord to standard ISO 12944 and NORSOK M-501 System 7B. This product contributes to the Green Buildings standard credits for LEED certification. | |
HYDROGUARD® Zinc 81 | | Two components water based zinc rich epoxy primer in accordance to regulatory SSPC Paint 20 level 2. Can be used as primer in protective systems up to CX class in accord to standard ISO 12944. Contains 81% by weigh of zinc powder in dry film thickness. This product contributes to the Green Buildings standard credits for LEED certification. | |
